FIS V Plus fischer Spain

Safety that lasts for generations

With FIS V Plus, fischer establishes the first universally applicable injection mortar with an assessed (ETA) service life of 100 years in concrete. In addition to its durability, the bond strength in concrete increases by 45 percent with the new generation of fischer universal mortars, thus ensuring maximum safety for an entire century.
Whether steel structures, consoles, facades, rescue ladders or cable trays - with FIS V Plus, users can design and carry out numerous fixing tasks with a single product.
The product family is completed with the FIS VW Plus High Speed with its shorter curing time for a rapid work progress even at low temperatures. And the FIS VS Plus Low Speed with an extended processing time suitable for large drill hole depths at higher temperatures.

More information

Product features

ETA assessment: extended service life of 100 years

The new ETA assessment in concrete confirms the durability of the injection mortar with an extended service life of 100 years instead of the usual 50 years.

FIS V Plus

Extensive range of accessories

The extensive range of accessories from anchor rods to internal thread and reinforcement anchors is optimally matched to the universal mortar FIS V Plus. This increases the flexibility of the system and enables a wide range of applications.

FIS V Plus

Approval in adverse weather conditions

The FIS V Plus is also approved for use in water-filled boreholes in adverse weather conditions.

FIS V Plus

Optimization of the mortar formula

The optimization of the mortar formula of the FIS V Plus results in improved load values in cracked and non-cracked concrete.

FIS V Plus

Most extensive masonry approval

The FIS V Plus ETA currently includes the most approved masonry bricks on the market. Thus, the universal mortar is the most reliable solution for almost any application.

Variety of approved building materials

Cracked and non-cracked concrete

Solid brick and solid sand-lime brick

Vertical perforated brick and sand-lime perforated brick

Aerated concrete

Comparison of processing and curing times

Temperatures at anchoring base *	Maximum gelling time		Minimum curing time
	FIS V Plus	FIS VW Plus High Speed	FIS V Plus	FIS VW Plus High Speed
-10 - -5 °C	-	-	-	12 Std.
>-5 – 0 °C		5 min.	24 Std.	3 Std.
>0 – +5 °C	13 min.	5 min.	3 Std.	3 Std.
>+5 – +10 °C	9 min.	3 min.	90 min.	50 min.
>+10 – +20 °C	5 min	1 min.	60 min.	30 min.
>+20 – +30 °C	4 min.	-	45 min.	-
>+30 – +40 °C	2 min.		35 min.